Three Things To Keep In Mind When It Comes To Your Home's Furnace

Posted on: 23 November 2016

Getting the best performance from your home's furnace can be critical for ensuring the comfort of your home in the winter. Yet, new homeowners can often be uninformed when it comes to the furnace that heats their home. By understanding the following important points, you should be better positioned to keep your furnace working efficiently throughout the coming winter months.

Dirty Air Filters Can Pose Serious Problems For Your Unit

Changing the air filters can be one of the most routine and important maintenance tasks that you do for your furnace. If you allow your air filters to become clogged, you may find that they are unable to allow enough air to enter the furnace. While this may not seem like a major issue, it can dramatically boost the damage the system sustains from wear and tear. This will occur because the blower for the furnace will have to work for much longer to circulate enough air. To minimize this type of furnace problem, you should change the filters every month or two, and you should also make sure that you only use the correct type of filter for your unit.

Residue Can Clog The Burner

Unburnt oil or gas residue can quickly start to gather on the burner. In small amounts, this is not a particularly problematic issue. However, there will eventually be enough residue to inhibit the flow of fuel to the pilot light and burner. Once this occurs, the furnace will struggle to stay on, which could force you to repeatedly have to relight the pilot. To avoid this common furnace issue, you should wipe down the burner every couple of months with a damp cloth. Prior to turning the furnace back on, you should make sure that the burner is completely dry or else it will be unable to ignite.

Thermostat Issues Can Greatly Reduce The Heating System's Energy Efficiency

Your thermostat is essentially the control center for your heating system. When the thermostat starts to encounter problems, it can result in the system failing to turn on when the temperature gets low or failing to stop once the desired temperature is reached. This can occur due to either dust gather on the internal sensors or the internal thermometer coming out of alignment. When you have your furnace serviced, you should also make sure the technician inspects and services the thermostat. This will typically involve removing any dust from the interior as well as making sure that the thermometer is perfectly balanced.

If you do experience issues with your furnace, don't hesitate to reach out to a local furnace contractor for repairs.  

Share